How To Make A Table For A Miter Saw

How To Make A Table For A Miter Saw?

A Table is required when you want to use a miter saw properly to cut anything for your projects or workshop. But what if you can make a table at your home and save money? It will be a great thing, right? 

Well, here we have managed a well-researched guide on how to make a table for a miter saw and some tips and tricks to make the project more effective.

How To Make A Table For A Miter Saw?

Making a table for a miter saw will be a hard thing for you if you don’t have the right guides and tools,

So before we get started with the entire process, we’ll need some initially required tools, the list is we have below:

  • Panel Saw
  • Table Saw
  • Miter Saw
  • Ear Plugs
  • Brill With Bits
  • Tape Measure
  • Glasses
  • Pencil
  • Square

Now ready the materials needed for the project:

  • Plywood
  • Wood board
  • Wood studs
  • Four hanger bolts and nuts
  • Nails

Miter Saw Station

We highly recommend you manage the required tools and materials from your local shop or online marketplace, but if for some reason you can’t manage one of the tools, you may not be able to make the project properly! 

Now follow the step-by-step guide on how you can make a table for a miter saw at your home!

Step #1: We need to start the project very carefully and that’s why the first step we need to do is measuring the width, depth, and height of the saw.

Now comes to the height section, it’s important and you need to measure from the base on a flat level surface to the machine. Here you can subtract 2x the plywood thickness.

You should include a bit extra width of your whole miter saw so that it would be easy to take your saw machine in and out. And the depth should be deep for the base of your saw machine to be firmly on the table we’re going to make.

Step #2: Now you need to cut the plywood according to your requirements, to do it simply, rip the plywood into an 18” strip and a 17.75-inch strip for the bottom and top of your table.

When it’s done, you’ll need to cut the top part of your plywood so that you have a spot for the machine.

You can take a bit of help from a circular saw depending on the width of the plywood.

Step #3: in step three, you need to create the dividers using a hand saw to rip the ⅙ to the height of the machine.

The measure of the same width as your table’s top section, and the next thing you make a stop block by clamping a piece of scrap. And using your square mark the ripped 1×6 with tape and draw a little line.

Step #4: If everything goes well, this step might be the last step for you. Yes, you need to assemble every single part, ensuring all the height is the same and correctly screwing together.

Also Read:

FAQ Section:

Do I Need A Special Table For A Mitre Saw?

No, you can use a normal table for your miter saw, but if you want to use a strong and standard table, it would be a bonus option for you because a good table will massively help you for better work with your miter saw.

Can You Set A Miter Saw On A Table?

Since all the miter saws are portable, you can easily set your miter saw on a table and cut your woods as you wish.

Are Miter Saws Safe?

Nothing is secure if you don’t know the proper use for them, but in the case of a miter saw, you can be safe if you know the right use of the machine.

Does A Miter Saw Need Oil?

Sometimes you may need oiling to your miter saw to make the machine’s parts running and active. 


When it comes to making a simple table for your portable miter saw, you just need to follow the shared guide.

However, if you have any queries about how to make a table for a miter saw, you can comment below to let us know.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/vinosalrio/public_html/wp-includes/functions.php on line 5309

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/vinosalrio/public_html/wp-includes/functions.php on line 5309

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/vinosalrio/public_html/wp-content/plugins/really-simple-ssl/class-mixed-content-fixer.php on line 107